Tips From the Moving Business Pros: How to Move a Pinball Device



With pinball making a substantial resurgence across the nation, Mild Giant wishes to ensure that these traditional, lovely machines stay damage-free while being transferred. Oh, and we desire individuals moving them to be safe, too.

Initially glimpse, pinball makers can appear intimidating to move because of their weight, fragility, and size. The good news is, our skilled Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

The bulk of modern pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs utilize this system, in addition to the early Solid State machines.

Later devices have hinges and utilize a locking system to keep the headbox upright. There may also be two bolts inside as included security, in case the lock is broken or accidentally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball machines, you need to eliminate the headbox rear gain access to panel to get to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, but gradually the secret might have been lost. On a regular basis, there is a screw keeping this panel in place.

When within, get rid of the bolts and disconnect the big connectors that have wiring going down into the device. You might wish to identify these adapters to put them back in the right spot, but they ought to be various sizes, making it tough to plug back improperly.

You can now get rid of the headbox completely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in location.
Early Strong State Pinballs

For early Strong State Pinballs, you will require to get rid of the back glass. There is a lock located on the headbox in one of three locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the center.

As soon as opened, get rid of the back glass by raising it up using the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box lamp panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out to you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the light panel in order to swing it open.

Now that you are within, you can remove the bolts, and any plugs that have wires going down into the machine. You may wish to label these plugs to put them back in the best spot. You may not need to eliminate the plugs, as the electrical wiring must be long enough to enable the headbox to be folded down.

At this moment, you can secure the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and needs no tools.

If you can now fold down the head box onto the cabinet, you're done. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

If you can not fold the head box down, then you need to enter. There is a lock located at the top of the back glass in the. Use the supplied key to unlock, and remove the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will require to get rid of the display screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.

Pinball Machine legs are held in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be gotten rid of, and the legs will come off.

These threaded plates and captive nuts can be harmed, and the usage of additional nuts may have been required. If this is the case, you will have to open up the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Then move out the playfield glass, and put in a safe place. Next, raise the playfield by placing your hand where the ball drains pipes, and raise the playfield up.

You must now have access to any nuts that might have been used. When any nuts have been removed, replace the playfield glass and lock down bar, and lock useful reference the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to fit.
Loading the Pinball.

You are now ready to transport your pinball maker. Prior to you pack it, ensure you eliminate the pinballs so they don't bounce around during transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to loading the machine. Get a pal to help and have one of you supporting the pinball, while the other gets rid of the front legs. Move the device in, and after that remove the back legs. It is much easier to load the machine front.

Ensure you strap the pinball in, as you do not want it moving if you have to stop unexpectedly!

For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to get access to the bolts and plugs within. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it might be much easier to eliminate the legs just prior to filling the device. Grab a friend to assist and have one of you supporting the pinball, while the other removes the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *